Home Riders Bikes News Events Contacts App
Use App
Home
Blog by MOTOIB
How i setup my Rearset Spring on My R3
FAQ • Contacts • Privacy policy • Agreement • Rules of Conduct
White mode
MOTOIB
MOTOIB
15 Jun 2022
Report

How i setup my Rearset Spring on My R3

I have gotten a lot of people asking how I mounted my rearset spring on my aftermarket rearsets, so here is a quick video on what it looks like on my 2015 Yamaha R3. Hopefully, this helps the people that are having a hard time mountain the spring.

0 1.3K
Comments
No CommentsNo Comments yet. You can write the first
Please Log In or install the app. Comments can be posted only by registered users.
Related
Adrian Silverio
Adrian Silverio
How I know I'm going to look in the spring after a winter of hibernating
How I know I'm going to look in the spring after a winter of hibernating
1
Danny 4D's
Danny 4D's
How good @ math are you? this is how many hours I've been out today
¡ ¡ ¡ ! ! !...
How good @ math are you? this is how many hours I've been out today
2
William Mowrey
William Mowrey
How bad of an idea is my friend's cheap throttle lock?
How bad of an idea is my friend's cheap throttle lock?
3
Jacqueline
Jacqueline
How a helmet should fit
The manual for the HJC helmets and how it should fit properly...
How a helmet should fit
0
Adam Sarros
Adam Sarros
How do reset my dash on zx6r?
I found out that my front tire was on backwards which caused all of the problems on my dash but now it won't go away is there a way to reset it?...
How do reset my dash on zx6r?
3
Josh Arella
Josh Arella
How is this even possible?!
How is this even possible?!
0
Martin Hodari
Martin Hodari
How often do you replace your mirrored visors?
I know mirrored visors are high maintenance and are far less durable then their tinted counterparts but I've had my visor for only about a month and it's already getting scratches and not small little...
How often do you replace your mirrored visors?
0
Martin
Martin
How to remove the fairings off any 2020-2022 BMW S1000XR
How to remove the fairings off any 2020-2022 BMW S1000XR
0
Jose Leonardo
Jose Leonardo
How to clean the indicator switch (VTR1000 Firestorm 1997)
You’ll need a Philips screw driver, some contact cleaner, rags and about half an hour. Also helpful is an old tooth brush and a flat head screw driver. First remove the two screws under the...
How to clean the indicator switch (VTR1000 Firestorm 1997)
0
TSK
TSK
How in hell did I end up owning one of these?
I've always been attracted to motorcycles that were fast and high-tech and futuristic. This little beauty defies all of those categories. It isn't a sense of nostalgia... I was 8 years old when the GB...
How in hell did I end up owning one of these?
0
Martin
Martin
How to replace the Air filter on 2020 2021 2022 S1000XR
How to replace the Air filter on 2020 2021 2022 S1000XR
0
Adrian Silverio
Adrian Silverio
How to keep my keys in the ignition.
Although haven't had someone do this maliciously (yet) but find it pretty annoying that someone can just pull your keys out of the ignition willy nlly and kill my bike while I'm riding. know a couple...
1
Honda VFR 800
Honda VFR 800
How to fix an erratic speedo, most of the time this is a part worth changing
This job is a nice easy and cheap one for your VFR. If you find your speedometer is becoming erratic, or worse, simply stops then there is often a simple fix by replacing a plastic coupler. You c...
How to fix an erratic speedo, most of the time this is a part worth changing
0
Honda VFR 800
Honda VFR 800
How to remove the fairing for access to various things
The fairings need to be removed to access a number of parts of the bike so this is a guide on how to take the panels off without breaking anything. It’s not a particularly hard job and takes abou...
How to remove the fairing for access to various things
0
KTM 990 Adventure
KTM 990 Adventure
How to change seals in WP forks.
-Front wheel, brake caliper and fork guards off -Loosen top triple clamp bolts and break the caps loose -Remove forks and unscrew the caps the rest of the way -Pull down the fork spring and insert...
0
Ducati Multistrada 1200
Ducati Multistrada 1200
How to properly fill the hydraulic clutch circuit on the Ducati Multistrada 1200S ABS 2015
Clutch fluid is corrosive and will damage paint. Avoid contact with eyes and skin. In case of accidental contact, wash thoroughly with water. Fill the reservoir with specified fluid taken from a...
How to properly fill the hydraulic clutch circuit on the Ducati Multistrada 1200S ABS 2015
0
Ducati Multistrada 1200
Ducati Multistrada 1200
How to drain water from the clutch hydraulic circuit
Remove the cap to expose the bleed valve (3). Connect a clutch circuit bleeding tool to the clutch slave cylinder bleed valve (3). Remove the cover (1) with the membrane from the clutch fluid reservo...
How to drain water from the clutch hydraulic circuit
0
Yamaha YZF R1
Yamaha YZF R1
How to remove and install a new clutch on a Yamaha R1 1998-2003 models.
This is a step by step video including torque specs....
How to remove and install a new clutch on a Yamaha R1 1998-2003 models.
0
Home
Menu
Posting
Notify
Sign In
Profile
Content creation
Search
Find a user
See More
FAQ • Contacts • Privacy policy • Agreement • Rules of Conduct