My bike is a 2007 GSXR 750. Bought this one at the beginning of the year and instantly fell in love with it. The handling is great, even though it is stretched, i was surprised at that. The power comp... more
Need some input if anyone may have any ideas. My bike seems to be jumping/cutting in and out real hard at high rpms. Use to only do it every now and then on a wheelie playing with the throttle real qu... more
I give you a redesigned seat release, no key but retained the lock housing. Chinese lever adjuster repurposed. The anodize should last longer down there.
Not using factory throttle housing, controls... more
Oiled the K&N filters and stuck them on for a look.
Oil lines tweaked to final position so they don't touch any part of the header
I probably could have used a slight bend vs straight fittings,... more
Brake line retainer stolen from my XX arm and trimmed, I just had to sneak a Honda part into the build :P
That 1 job no one likes...
Now, about those holes in the clutch cover..
I would have got mo... more
4 cans of brake cleaner, 1 can WD40, half a dozen rags, 2 toothbrushes, a Scotch Brite pad, 6 hours labor and my last few squirts of S100 to detail this motor.
Popped the side covers off and cleaned... more
See if this helps...
Frame is at powdercoat shop & small parts are off in the mail for powder too, came home and poured 2nd coat of resin on the heat shield.
Nipped the long reservoir hose and w... more
Exhaust finished. Tidied up the mount tab, welded the can to the mid pipe, cleaned up the mid pipe and ran over the previous welds with the tig torch to dress them up.
Frame just about completed too,... more
The clutch lever pivot hole size didn't match the lever perch, so I turned up a brass bushing to take up the slack
Offered up the rear master cylinder
Played around with some fittings too
Cooler sp... more
Looks good, transfer to aluminum
Fleshed out ]
In order to weld them on, I needed to figure out a way to hold each mount at the same height. I prefer fixturing vs working off dimensions and scribe... more
I've always wanted to build a slingshot... now I get to build 2!!
This one is a 1990 750. When I got it, it had already had 07 gixxer front and rear ends grafted on. The front looks legit and the rea... more
These pics are from my phone. I recorded it all and I'll have the video for it ready in a month lol. . . Not kidding lol. We hit some nice speeds, saw some wildlife(gator and turtle), and saw the carn... more
August 12, 2015, I woke up like every morning except we had plans to go ride. We took our children to the sitters, geared up, met one of my exe's friends and we started. It was a slow relaxing ride,... more
I am having issues with my GSXR 600 for the past two years. This is my third Rectifier in the last one year and since the rectifier is under warranty I am lucky to get it replaced for free by Rick Mot... more