How a helmet should fit

The first motorcycle helmet was not a helmet at all – just a leather cap that would prevent nothing more serious than a few cranial grazes. But concussion injuries in bike racing led to the first hard...

Have you got a Helmet that is...

I have a bad habit of replacing helmets.... but really how often?...

¡ ¡ ¡ ! ! !...

Shots from an Atlantic magazine article of the same name, with images from various Indian police/military agencies with motorcycle display teams. Amazing!...

You’ll need a Philips screw driver, some contact cleaner, rags and about half an hour. Also helpful is an old tooth brush and a flat head screw driver. First remove the two screws under the...

I've always been attracted to motorcycles that were fast and high-tech and futuristic. This little beauty defies all of those categories. It isn't a sense of nostalgia... I was 8 years old when the GB...

Although haven't had someone do this maliciously (yet) but find it pretty annoying that someone can just pull your keys out of the ignition willy nlly and kill my bike while I'm riding. know a couple...

So that the motorcycle rider can talk with the passenger in the backseat, 1960s....

I just removed and drained the tank of an Kawasaki zx6r that had been sitting for 10 years. The fuel pump was copper stained, there was loads and loads of sediment, it feels corroded around where the...

Winter is a very good time of year to sort through your riding gear, clean it and prepare it for the new season. And since rather few fellows ride during the winter in the northern hemisphere, cleanin...

Gear Position Indicators or GPIs are little devices that look at speed and RPM and determine which gear you’re in. A couple of years ago I built one for my TL1000 trike and wrote some code to make it...

Clutch fluid is corrosive and will damage paint. Avoid contact with eyes and skin. In case of accidental contact, wash thoroughly with water. Fill the reservoir with specified fluid taken from a...

Remove the cap to expose the bleed valve (3). Connect a clutch circuit bleeding tool to the clutch slave cylinder bleed valve (3). Remove the cover (1) with the membrane from the clutch fluid reservo...

This is a step by step video including torque specs....