How to deal with those pesky blown fuses

Moo Knigh Rider moon !...

¡ ¡ ¡ ! ! !...

My answer: "Easy. All you need is a large bag."...

You’ll need a Philips screw driver, some contact cleaner, rags and about half an hour. Also helpful is an old tooth brush and a flat head screw driver. First remove the two screws under the...

I've always been attracted to motorcycles that were fast and high-tech and futuristic. This little beauty defies all of those categories. It isn't a sense of nostalgia... I was 8 years old when the GB...

Although haven't had someone do this maliciously (yet) but find it pretty annoying that someone can just pull your keys out of the ignition willy nlly and kill my bike while I'm riding. know a couple...

1. Detailing... engine, chain, sprockets and guards, rims, wax the painted parts 2. Swap the pillion pegs back to the original solo rearsets 3. Fix the seat hinge with its busted stud 4. Lube and a...

I just removed and drained the tank of an Kawasaki zx6r that had been sitting for 10 years. The fuel pump was copper stained, there was loads and loads of sediment, it feels corroded around where the...

Some gorilla tape, a staple gun, and about fifteen minutes. I am not playing games anymore....

Salespeople at motorcycle dealerships aren’t always bad, but they can be an unfortunately necessary part of the purchase process. ( High Altitude Productions./)Nearly every woman I know has...

So basically today I was working on my bike a bit (just cleaning and installing frame sliders and a USB charger, basic stuff) and my HOA fined me because that’s not allowed. I can’t even wash it....

Clutch fluid is corrosive and will damage paint. Avoid contact with eyes and skin. In case of accidental contact, wash thoroughly with water. Fill the reservoir with specified fluid taken from a...

Remove the cap to expose the bleed valve (3). Connect a clutch circuit bleeding tool to the clutch slave cylinder bleed valve (3). Remove the cover (1) with the membrane from the clutch fluid reservo...

This is a step by step video including torque specs....