Cable Bridge

#imafatty...

I'm horrible at stopping to take photos to document my life, but at least I have Voodoo Doll Natalie to bear witness!...

So this is what that cable contraption in my primary tool pouch is for! Yes, I read the part of my owners manual that explains what it's really for, but I think it's safe to say I'll never actually u...

A relaxing ride from Moretonhampstead towards steps bridge on my Royal enfield interceptor 650. #Dartmoor #Moretonhampstead #stepsbridge #Dunsford #interceptor650 #divvymanstravels #mentalhealthmotorb...

Part 2...

Part 3...

Part 4...

Part 2...

Part 3...

Ended up in the ditch at the side of the road, no damage apart from the crash bung, not even a mark on the bike...

How do I go about fixing this?...

Took off work at little early and visited these historic Kansas arch bridges...

Buying all new control cables (not speedo and tach) for the bike would apparently run around $200. Having promised Bonnie I would try to keep costs under control, I looked into building the cables my...

These are the little brass fittings that the soldered wire end slips into so that it can attach to the throttle twist grip. The one on the right was damaged, the left one was made from a piece of 1/4...

The front brake cable was definitely not original. It appeared to be some kind of universal replacement because there was no yoke fitting at the brake end--only a clamp arrangement that allowed adjus...