Evap canister removal

At some moment I realized that a little backpack isn’t enough, I thought about the side bags. I measured a large number of textile and leather cases, but everything was not that I wanted to. And the s...

We continue talking about cases made of canisters....

Before upgrades picture showing what’s changing....

Hi guys & girls, chasing that 100 subs if anyone could help me out ? loads more content coming on the ninja https://youtu.be/FoKb8H7KohM...

This video will show how to remove the Yamaha r3 fairings, headlight, and metal stay. you will see the damage to the bike and how bad the headlight is. so this will show how bad the bike was after the...

Haven't had to remove the rear wheel before. What I've loved about riding is all the opportunities to learn basic mechanical skills....

I have read that removing the swinging arm spindle is the single most difficult task to do on a Tiger Cub. So far I have sprayed it with WD40 and given it a tap with a hammer and drift, with no moveme...

11/16/17 - 2,227 Miles...

Hi Everyone! Today i am going to share with you how to take rust out of an old Harley motorcycle flywheel with the electrolytic rust removal principle. All you need is a plastic bucket (non conductiv...

It took me about 45 minutes to remove all the engine mounts and then to pull the engine out of the frame, but it takes you less than 2 minutes to see how I did it. Bike is a 1974 Honda CL200 (same eng...

The first thing I wanted to do after buying the donor was to remove the EGR system and clean and tune the carburetor so I wouldn't have to revisit these issues later. EGR is a gas recirculation syste...

It would ordinarily be a bit premature to change the air filter element, but my recent trip had me concerned. I rode on a number of dirt roads through a bunch of fine dust and I suspected that my filt...