How the Hornet greets a hahaha harley 😁✌

The world’s best-known motorcycle company, Harley-Davidson, is not exactly enjoying its best of times. It’s been a rough run for the bike maker these past few years, and chances are the trend will...

The official design pitch for this former Harley-Davidson Softail Standard was that its builder wanted it to have a refreshed look. Although most of the time we humans understand by "refreshed" mad...

The BOMB!!!!...

¡ ¡ ¡ ! ! !...

I know mirrored visors are high maintenance and are far less durable then their tinted counterparts but I've had my visor for only about a month and it's already getting scratches and not small little...

You’ll need a Philips screw driver, some contact cleaner, rags and about half an hour. Also helpful is an old tooth brush and a flat head screw driver. First remove the two screws under the...

I've always been attracted to motorcycles that were fast and high-tech and futuristic. This little beauty defies all of those categories. It isn't a sense of nostalgia... I was 8 years old when the GB...

Although haven't had someone do this maliciously (yet) but find it pretty annoying that someone can just pull your keys out of the ignition willy nlly and kill my bike while I'm riding. know a couple...

I just removed and drained the tank of an Kawasaki zx6r that had been sitting for 10 years. The fuel pump was copper stained, there was loads and loads of sediment, it feels corroded around where the...

This job is a nice easy and cheap one for your VFR. If you find your speedometer is becoming erratic, or worse, simply stops then there is often a simple fix by replacing a plastic coupler. You c...

The fairings need to be removed to access a number of parts of the bike so this is a guide on how to take the panels off without breaking anything. It’s not a particularly hard job and takes abou...

-Front wheel, brake caliper and fork guards off -Loosen top triple clamp bolts and break the caps loose -Remove forks and unscrew the caps the rest of the way -Pull down the fork spring and insert...

Clutch fluid is corrosive and will damage paint. Avoid contact with eyes and skin. In case of accidental contact, wash thoroughly with water. Fill the reservoir with specified fluid taken from a...

Remove the cap to expose the bleed valve (3). Connect a clutch circuit bleeding tool to the clutch slave cylinder bleed valve (3). Remove the cover (1) with the membrane from the clutch fluid reservo...

This is a step by step video including torque specs....