1985 Honda cb700sc "restoration"

Continuation of the VFR resurrection story Gradually started cleaning the parts. The swingarm turned out to have a significant wear mark due to a makeshift footpeg bracket. BEFORE:...

Rear caliper NISSIN but not from VFR(...

Cleaned and Painted...

The next part of my creative work in the form of a beaten-up sport bike :)...

Having removed the knee, one can rejoice, the inserts look good, no rotation detected)...

I've decided to publish my blog in short parts for your convenience. I think it would be boring to read a restoration blog the size of "War and Peace" :) Measured the oil clearances of the main and c...

Gathered up The NC21/24 one-way clutch arrived....

Sprayed the head gaskets with a special spray....

I also serviced the front fork, filled the forks with ENI 10W, overhauled the steering, and tightened it....

Almost the Final Step in Restoring the NC30 While assembling the engine, I didn't notice the differences in the shafts where the clutch is mounted. Naturally, I started fitting the clutch basket from...

Then, problems with the electrics began, as the order of the cylinder operations was different. I ordered an NC-24 ECU from China; the prices for them at the scrapyards were outrageous, but this one w...

I thought I'd install them and forget about it, but nope, turns out the exhaust flanges on the 21 motor are tilted differently than on the NC-30. Had to bend them again, try fitting them like 20 times...

The results of the first outing showed the following: The clutch behaves inadequately. As I suspected, the release bearing with NC-30 doesn't fit the 21-24 engine, it's too long. I had to temporarily...

This custom Grom, assembled by ‘Furii Shop’ of Thailand, has placed the obligatory half-fairing to provide cafe racer flair and stacked this MSX 125 with some serious parts - a split custom exhaust fr...

This Concept is created to celebrate the 40th anniversary of the first Segale - Honda produced (1979). The bike, a combination of modern technology and old-fashioned charm, is equipped with a special...

Part 4 of my attempts to revive the Honda Continuing with the exhaust canister hassle...

The Repsol Honda team officially introduced its prototype Honda RC213V 2018 and is going to repeat last year's success: the champion title, the constructors' cup, the victory in the team classifica...

Artist and motorcycle enthusiast Bill Rodgers finds out this little GP Racer 1977 Honda MT125R is a challenging restoration....