XL1200c how fast can it go

If you’re a married man who rides a motorcycle, you’ve almost certainly had to face the challenge of trying to convince your wife that riding is a good idea. Sure, there are plenty of great women ride...

Plaid, mountains and snow... Welcome to Canada ❄️...

¡ ¡ ¡ ! ! !...

You’ll need a Philips screw driver, some contact cleaner, rags and about half an hour. Also helpful is an old tooth brush and a flat head screw driver. First remove the two screws under the...

I've always been attracted to motorcycles that were fast and high-tech and futuristic. This little beauty defies all of those categories. It isn't a sense of nostalgia... I was 8 years old when the GB...

Although haven't had someone do this maliciously (yet) but find it pretty annoying that someone can just pull your keys out of the ignition willy nlly and kill my bike while I'm riding. know a couple...

I have leftover motul 3000 4t mineral oil from my first oil change but bought synthetic oil from kimpex 4t 10w40. Since have it, why not use it?...

I just removed and drained the tank of an Kawasaki zx6r that had been sitting for 10 years. The fuel pump was copper stained, there was loads and loads of sediment, it feels corroded around where the...

The fairings need to be removed to access a number of parts of the bike so this is a guide on how to take the panels off without breaking anything. It’s not a particularly hard job and takes abou...

-Front wheel, brake caliper and fork guards off -Loosen top triple clamp bolts and break the caps loose -Remove forks and unscrew the caps the rest of the way -Pull down the fork spring and insert...

Clutch fluid is corrosive and will damage paint. Avoid contact with eyes and skin. In case of accidental contact, wash thoroughly with water. Fill the reservoir with specified fluid taken from a...

Remove the cap to expose the bleed valve (3). Connect a clutch circuit bleeding tool to the clutch slave cylinder bleed valve (3). Remove the cover (1) with the membrane from the clutch fluid reservo...

This is a step by step video including torque specs....

Left is the battery OME, right was a spare one, it fits in the terminal just want to make sure it's not going to cause any problems...