Custom throttle ?

This is a 2012 Custom V Rod MGM Harley Davidson by No Limit Customs.NLC MGM Custom bikes are the premier builders of V Rods if your looking to make a statement this is the bike for you....

Each person has something they’re good at. For some, it’s public speaking, writing, or chugging words, while for others, like Eak from K-Speed Customs, it’s a bit more interesting such as preparing...

In between, 1979-1980 Honda developed some powerful motorcycles with six-cylinders which was specially made for racing purpose. Now in these modern days, that kind of power-packed motorcycles was d...

Ever start out with a basic idea, only to get hopelessly carried away? A wheel swap and a simple suspension tweak were all that Frank Edens was planning for his...

This custom BMW R1100GS is the work of one of Poland’s pre-eminent custom motorcycle garages – Red Hot Chili Customs. The donor bike was bought from its former owner in Switzerland before being tra...

The Honda CX500 debuted in the late 70s and was manufactured into the early 1980s. Featuring a 497cc transversely-mounted v-twin making 50 horsepower, it would eventually develop somewhat of a cult fo...

What you see below is a custom-framed, snowmobile-engined motorcycle weighing just 320 pounds, powered by a 150-hp Arctic Cat F7 700cc two-stroke engine....

Very cool key for the Intruder, I would like one for my Sportster...

Https://youtu.be/ALO5oQZ_8EM?si=DxYQcrjNacQrIzBg...

  A lot of unanticipated work went into this assembly.  The geometry of the new body halves was different enough that I had some binding of the rotor when everything was tightened down. &nbs...

The throttle twist grip assembly is a two cable unit. The housing halves were in good shape except for severely pitted chrome on the top half.  ...

I determined that since the original screws are enough larger than the repro ones, that I could drill and re-tap the body for the original screws. After buying the special taps, I probably would have...