Found this interesting. How is a Kalex chassis made?

Many riders wear them as an alternative to leathers – but have you ever considered what goes into manufacturing a pair of riding jeans?...

¡ ¡ ¡ ! ! !...

How good is it made?...

I know mirrored visors are high maintenance and are far less durable then their tinted counterparts but I've had my visor for only about a month and it's already getting scratches and not small little...

You’ll need a Philips screw driver, some contact cleaner, rags and about half an hour. Also helpful is an old tooth brush and a flat head screw driver. First remove the two screws under the...

I've always been attracted to motorcycles that were fast and high-tech and futuristic. This little beauty defies all of those categories. It isn't a sense of nostalgia... I was 8 years old when the GB...

Although haven't had someone do this maliciously (yet) but find it pretty annoying that someone can just pull your keys out of the ignition willy nlly and kill my bike while I'm riding. know a couple...

Where do your tires come from? From a dealership, duh, but before that, they go through a convoluted chain of importers and distributors and shippers; ultimately, that chain starts at the factory,...

The fairings need to be removed to access a number of parts of the bike so this is a guide on how to take the panels off without breaking anything. It’s not a particularly hard job and takes abou...

-Front wheel, brake caliper and fork guards off -Loosen top triple clamp bolts and break the caps loose -Remove forks and unscrew the caps the rest of the way -Pull down the fork spring and insert...

I found a parts manual online that has diagrams of all of the different parts on the motorcycle and where they go.The manual shows a bike that is the same model as mine but it is 2 years older than my...

Clutch fluid is corrosive and will damage paint. Avoid contact with eyes and skin. In case of accidental contact, wash thoroughly with water. Fill the reservoir with specified fluid taken from a...

Remove the cap to expose the bleed valve (3). Connect a clutch circuit bleeding tool to the clutch slave cylinder bleed valve (3). Remove the cover (1) with the membrane from the clutch fluid reservo...

This is a step by step video including torque specs....