How to build your very own nx650 streettracker, Part #4

The process of building in the pics:...

The beginning of the process....Just got the rear R1 subframe back from my mates, he's just welded some extender blocks inside the tubular subframe, needs cleaning up before I get some cross members w...

Purchased a Gilera 150 headlight front headlight. for my fighter....

Radiator and Front headlight brackets need modifying,...

Modified Radiator hoses and fittings done.Silicone top hose mounted to new re positioned top mount, connected to new ZX636 Rad sprayed Black...

All stripped Down again.Having just finished the rear end, or so i thought all torqued up ,wheel fitted new Cush rubbers fitted all nice and tight and by tight i mean the Chain would tear the tyres to...

Steering Damper adapter spacer made...

After receiving so many enquiries about the building of these bikes i have finally got round to going through step by step on the whole process....

The fuel tank on both bikes came from an early (1980's?????) Honda CG125 Which will require a small amount of work underneath on the tap side in order for the tank to sit down enough to get it level w...

THE WHEELS Rear wheel is standard 17" rebuilt spokes or just powder coat the whole thing as i did on version one choice is yours. Front wheel is now a 19" this is achieved either by using the origina...

Engine Up to you this one but if you bought a good bike to begin with then all you need do is paint it! PJ1 satin engine paint was used and if you follow the directions to the letter you should be f...

The majority of the dominators electrical components CDI, fuse box etc are housed in the now departed fairing. In order to keep the wiring at the headlight to a minimum i simply pulled everything back...

There are many motorcycles with either belt or shaft drive out there, but still, most of the two-wheelers come with a chain final drive and this calls for special care....

If you don't want to spend big bucks on a new chain kit every season, learning how to take care of your bike is the way. And this is even more important, as basic chain maintenance is a thing pretty m...

Incase you ever need to do it yourself. good for head gaskets...

You may have noticed there’s a lot of new motorcycles coming out lately (half of which seem to be from Yamaha). That means if you’re a person who likes to get an aftermarket exhaust bolted on straight...

#custom #build #rack...