Platinum Throttle Cables

Barnett Cables. Special thanks to Ivan at Barnett for taking special care of this order!...

On my road trip I decided that I HAD to have some sort of throttle lock or cruise control if I ever wanted to take a ride like that again. (which I do) I initially decided that I would look for a Thr...

The throttle twist grip assembly is a two cable unit. The housing halves were in good shape except for severely pitted chrome on the top half.  ...

I determined that since the original screws are enough larger than the repro ones, that I could drill and re-tap the body for the original screws. After buying the special taps, I probably would have...

Buying all new control cables (not speedo and tach) for the bike would apparently run around $200. Having promised Bonnie I would try to keep costs under control, I looked into building the cables my...

These are the little brass fittings that the soldered wire end slips into so that it can attach to the throttle twist grip. The one on the right was damaged, the left one was made from a piece of 1/4...

The front brake cable was definitely not original. It appeared to be some kind of universal replacement because there was no yoke fitting at the brake end--only a clamp arrangement that allowed adjus...

A little wind therapy in Wine Country...

On Saturday morning, I went to Throttle Company in Columbus, OH...

Featuring artist C'ing Jerome...

  A lot of unanticipated work went into this assembly.  The geometry of the new body halves was different enough that I had some binding of the rotor when everything was tightened down. &nbs...

This isn't just any Scrambler. It's the special edition born to tear up the asphalt and turn heads. From the chaotic streets to the curves of the savannah, the roar of this Ducati doesn't go unnoticed...