4 caliper from a 600RR 2008, one for the front and 3 for the back and 2 the caliper from the Kawa ZX10R reinforced hoses custom tank... more

DELKEVIC Exhaust... more

New toys... more

The first step was removing all the plastic (later selling it) in order to remove all the excess and just to further not to mess with him in the soldering of cracks and other... more

my bike before the Stuntlife =)... more

My list of things that I changed -Front forks from 1000RR inverted -Front wheel 1000RR -Front fender from a 1000RR -Lateral footstep custom -Cage -Dampers in the cage and Subcage and sliders -525 c... more

175 so far, but trying to make it to the 186 ;)... more

cbr 600 track bike... more

Replacement of timing chain tensioners: I bought : 1. Two hydraulic tensioner 2. Two gaskets under the belt 3. Two caps for tensioners 4. Four valve-flapper... more

1) 1 gallon of antifreeze Motul Factory Line, flush for Moto radiators liquimoly Motorbike Kuhler Reiniger , 2 gallons of distilled water and two OEM washers that the need put new when you change the... more

During the inspection, electricians found only one burnt chip. This chip starter relay. but I have 2 problems , still only two ideas. The first is a sensor throttle position (which is not sold separa... more

I started google on this problem, and everywhere write that there is a common mistake vfr800 2002-2006 . Weak mass and as a consequence heat up and melt some of the electrical connectors. I clearly we... more