The best way to clean a rusty tank

Https://youtu.be/pIPlTLfTCUE...

Was just told to throw them in the laundry but I’ve always seen people soaking them! TIA...

What is the best way to capture sound while riding? Record sound seperately with intercom or put one more mic inside of the helmet (already have one for intercom)....

#divvymanstravels #XJ900S #XJ900SDiversion #diversion900s #yamahadiversionxj900s #yamaha...

Not all bikes get better with each successive model but Suzuki’s final incarnation of the RGV 250, the 1996 VJ23, was not only the finest of the line but also one of the finest two-strokes ever bui...

This will make you ill! I don't think sloshing a little bit of fresh petro is going to do any good. If my leg was long enough I'd kick my own ass, That's 8 years worth....

I took the remaining parts off of the frame. We may have to replace the fork springs because they are really rusted. I then took a bucket of soapy water and scrubbed all of the dirt, dust and cobwebs...

I have a replacement but am unsure of how to get the broken one out and am scared to cause any damage to threading or something....

I painted a car once many years ago, so I knew some of the basics, but painting materials and techniques have come a long way since then. My experience was with one-part acrylic lacquer and a high pr...

The tank was a little different. It had a few little dents, probably mostly from road debris, but since there is no access to the inside, they had to be filled....

To hold up the tank and fenders, I adapted three cheap Harbor Freight adjustable roller stands by taking the rollers off, adding plywood cradles made for each item, and putting the stands on wheels....

Here is where one of my main concerns was. I had to mask for the black paint, but only had a few small pictures to go by.   Let me digress here for a minute. When I searched the Internet...

Initial polishing. The pieces will get another thorough polishing before installation....

Now that I have the tank painted and pin striped, it still won't be truly complete until the Triumph badges are mounted. The badges are chrome plated die cast pieces screwed to either side of th...