Don't forget to check your tires

Brake discs (rotors) should all have their minimum thickness stamped on them, the discs will wear over time and once they get down to the minimum thickness then they should be replaced....

I know new tires are naturally slick but when they are inflated to nearly 50 psi they're very slick. Luckily this is the brunt of the damage and I'm fine....

These are the two colour choices at the moment - silver will look great with black rims and hubs I think, but Norton grey is also one of my favourite finishes on a bike......

Turned bike off and on then it worked fine. I was doing a small pull, probably in 2nd gear at 9k rpms on my CBR 600RR when my check engine light came on and I was rapidly decelerating. I pulled off to...

  First put on the rim strips, aligning the hole with the valve stem hole in the rim.  On the back wheel, it's necessary to cut holes for the rim locks....

BENELLI?since 1911?...

I recently replaced my rear tire -as I often do, when riding a sports bike. However, I didn’t remove the oils off the tire before taking off… OUCH! Nonetheless, lesson learned. The ground attempted to...

Youtube Phantom Hornet...

The industry standard for replacing motorcycle tires is six years after their initial manufacture date. However, if kept in temperature-controlled storage, this shelf life may be extended a little. Th...

Hey fellow riders! Just a friendly reminder to always check your tire pressure before heading out on your motorcycle. Today I checked my tires after a couple of long rides with friends and it's incred...

Putting new shoes on today....

That little piece broke of the tip with zero effort.. and means no more start ! ?...

This bike was supplied new with Dunlop K70 series tires. I'd replaced them many years ago with K81 tires, and though they didn't have many miles on them, and they had plenty of tread left, they were...