What is the best way to capture sound while riding? Record sound seperately with intercom or put one more mic inside of the helmet (already have one for intercom)....

Not only does this common wear service item cause vacuum leaks, it allows fuel to leak as well. This one was found to not shut off fuel when no vacuum was applied (engine off) The diaphragm has...

Liner or no? It appears I am destroying mine....

The honorary chicken foot...

?...

I found a parts manual online that has diagrams of all of the different parts on the motorcycle and where they go.The manual shows a bike that is the same model as mine but it is 2 years older than my...

What truly sets it apart is the clear engine cover, allowing you to witness the machinery at work when it's on! What are your thoughts?...

You’ll need a Philips screw driver, some contact cleaner, rags and about half an hour. Also helpful is an old tooth brush and a flat head screw driver. First remove the two screws under the...

The pleasures of a spring motorcycle ride in spring 2024.????????#Diversion900s #XJ900SDiversion #ridetosurvive #ridesafebacksafe #beasaferider #motorcycle #divvymanstravels...

UX6 - This 80 cubic inch flathead is one of six pre-production experimental prototypes built by Harley-Davidson in 1936. Three examples are known to exist today...

You need 12 off 17mm x 6mm Dzus fasteners and 12 slip on clips. D8 are the better machined fasteners. Available in crosshead , allen hex or D tab for hand removal. 3 along the top of the mi...

There are many opinions about the defective tire. I decided to check the wheel runout. I know - it's not very professional to write it, but I gathered some information. Rim +/- 0.2 mm Tire edge +/- 0....

Where the original dealer - Leather and Simpson - who sold this Tiger Trail back in 1982, had their premises....

After fiddling with the carbs for an hour this is the best I could get them.... sure is running sweet...

The Rocker Box had to come off first. We figured out that most of the bike uses Whitworth which is a British standard hardware. This is no longer used but since my bike was from 1970 they still used t...