Playing out yesterday enjoy the sun...

My sidestand mount got cracked, I seen thats a normal problem on these bikes! Now my friend did weld it and problem solwed but the next problem is to avoid same thing again. What kind of replacement...

I recently had to replace the headlamp relay which meant removing all the front fairings, so I decided to change the oil and filters while I was at it. After ordering the filters, I discovered t...

But I'm guessing there's a few out there (like me) who haven't got a clue! The first thing to note, is that it is DEAD EASY! If you know how to first of all remove the big fairings, you're 90% done!...

Just riding around town and stopped for a coffee and a cigar! The temperature was perfect ?!...

Have a few stands and not sure how everyone else stores them. Typically they are just on the ground or ill get tired and drag them up to the loft. Anyone hang these on a vacant wall or something?...

A look through my on-board tool box and some bush mechanics applied I continued home....

Take inner guard all the way off, offer up your new undetray so you can see what you need to remove – which is Everything behind the battery box...

There are two gasket sets available to assist in rebuilding the VTR pair of carbs, and then additional items you should replace and items you should closely inspect for wear/damage and repla...

#Diversion900s #XJ900SDiversion #divvymanstravels #advancedrider #ridetosurvive #ridesafebacksafe #beasaferider #motorcycle https://youtu.be/616QHp_CsXU?si=dCqmD5JhUhMhSo7n...

Lots of great routes to check out. I'm particularly interested in the "woodbooger"....

The industry standard for replacing motorcycle tires is six years after their initial manufacture date. However, if kept in temperature-controlled storage, this shelf life may be extended a little. Th...

What you need 1) LED Indicator Flasher Relay For Honda VFR 800 2002-2009 Fast Flash Fix...

What a lot of people have no idea is bar and chain oil is actually higher quality oil. The tolerances on a chain saw have to be extremely tight.. I mean think about it. If they were loose the chain wo...