Building of the bobber. Suzuki Intruder 750. Project Hooligan. Part 1.

Project Hooligan
The beginning of the bobber building. Part 1.

According to the plan, it would be an Old-School, understated, black matte, single and loud motorcycle.
I polished chrome parts with felt plus auto-polish.
I painted brake and clutch levers in black, customized it.

Pipes are wrapped with a thermal tape.

Made a mechanical fuel sensor in the tank.

Handlebar - Z-Bar, pipe - diameter 25 mm, pre-drilled holes for wiring and missed a metal cable in order to pull the wires.

I shortened the shock absorber rods, the motorcycle beautifully got down. The low basin pleases the eye. There are 7 cm of clearance - hello speed bumps.

Removed from the chrome liners forks anthers and inserted corrugations there.

Replacing the timing chain, spark plugs, sandblasting, painting and the heart is working as new.

Brushed metal with sand, and something was scraped off with a metal brush on a circular saw.
Mirrors in the style of angular handlebar, turn signals are darkened.

Caps on slide valves.

Now I’m on this stage….