Clutch Adjustment

I've done a wheelie and I killed the clutch =( I only take OEM . There's just a lot of disks... And being different, in different sizes and different thickness....

Clutch has been slipping for a while. overheated the pressure plate springs over 20,000 miles ago fully loaded in a sand pit on a +100 degree day. glazed the friction and steels since then. So deglaze...

Okay here we go. Have you noticed your clutch lever creaking and making noise? Having done this as part of my regular maintenance for some time, figured I would share. What happens is the master cylin...

Hooking up this ol cruiser ?...

Began to notice my Spiegler Black Synto brake and clutch levers were turning purple. They were just a few years old so, I contacted the company. They agreed to replace the defective product with a sil...

Clutch fluid is corrosive and will damage paint. Avoid contact with eyes and skin. In case of accidental contact, wash thoroughly with water. Fill the reservoir with specified fluid taken from a...

Remove the cap to expose the bleed valve (3). Connect a clutch circuit bleeding tool to the clutch slave cylinder bleed valve (3). Remove the cover (1) with the membrane from the clutch fluid reservo...

This is a step by step video including torque specs....

And why mom needs stronger clutch springs ????...

Ended up in the ditch at the side of the road, no damage apart from the crash bung, not even a mark on the bike...

How do I go about fixing this?...

I had a bit of free time today to mess around with the GB so I thought I'd tackle a relatively easy job. I bought the Barnett clutch springs when I got the piston kit and carb. They are a recommended...

While in lockdown perfect time to make those adjustments to the bike and keeping it clean...ready for country trips when we are able to so...

Does anyone live in the Phoenix metro area and have a recommendation for a shop that is fairly priced for a clutch issue?...

This is what’s left of my clutch cable!! I think it’s the original one ? Anyway removed & replaced!! I’ve never done a clutch cable before & couldn’t believe how easy it is to install…...

Couple weeks ago was planning on going on a ride, but was stopped short because my clutch wouldn't disengage. checked the adjuster but it was maxed out sol ordereda new cable. Holy shit am glad didn't...

No matter what anyone else tells you the issue is caused by poor maintenance and age of the hydraulic system. This is simple and cheap to fix. In the last two years I have seen this occur two ti...