Plastics

I'm so close to finnishing this project now I need to ride ...

Left the Purple behind, I love the new look! Iron Rockets MC!...

Seems to sit here at cruise and only drops one bar if im coasting down a hill etc...

Hi guys sorry but before I take a crap I ask for advice,I should change both bleeder valves for the calipers in the picture. I would like to buy them on wrs since I also have to get something else onl...

The arrow can be removed, I'm trying, but it holds on very tightly. I checked all the wires and all the contacts, + and - everything comes to the board but it doesn’t go further along the board........

It seems to be a filter. Don’t think I can reuse this one. Any recommendations for replacement?...

I tighten my chain every two weeks and every time do see that my axel is misaligned. Is this to to aggressive acceleration and wheelies or is it an issue of the bike? (use an impact drill to tighten t...

Have a 2022 SAS for about 10 months now. 100 % road while daily commuting. I do use the engine , but never did any funny stuff (wheelies or burn outs). The wear is only on one side (wires exposed),...

Can't tell if the tank itself is actually flaking or if it's a coat that's flaking off? What would you recommend doing from here?...

Am I right in thinking that to fit my Givi V47 box I have to ditch this genuine Yamaha rack for a givi rack or drill holes in the Yamaha rack to take a universal givi plate....

The clutch lever is currently wound in as far as it can go. I'm wondering if it's a big job to somehow get the clutch cable tightened as at the moment there's nothing left on the screw. Cheers and tha...

Hello everyone, quick question: Can these Brake pads still be used? Bike is a Honda CBR 600RR and these are from the back brake calliper. just did new ones in the front (all 4 of them). Do these also...

Left is the battery OME, right was a spare one, it fits in the terminal just want to make sure it's not going to cause any problems...

The other day tried doing a clutchless downshift on my motorcycle so put a little pressure on the shifter and revved a little and did it successfully. No weird sounds or anything. Today tried doing it...

Hello! I think I've worked this one out but if my life and all it's ups and downs has taught me anything it's that assumptions turn into the mother of all **** ups. Your assistance is most welcome at...

I can’t find a rebuild kit and it’s leaking. I could shim it close to max setting and leave it but I hate when I don’t have adjustability. What are your thoughts?...