TRex Frame Sliders

Kawasaki Ninja 1000 sx...

New shogun frame sliders and Puig windscreen....

I it's likely that there are a lot of automobile or motorcycle enthusiasts — some may be reading this right now, in fact — who are always dreaming of what they'd build if only they had the time, skil...

The covers are aluminum and not plastic Since I have an SP, I used a dremel to make an opening to let the shock absorber cylinders pass through and to access the adjustments....

Evening everyone! Just wanted to share something I just found out about the drivetrain. The chain sliders had uneven wear so I changed them and also bought new chain rings and chain... Some kms have...

I basically just stripped the rest of the parts off of the frame. This leave me to be able to throughly clean the frame and possibly touch up paint if necessary....

I took the remaining parts off of the frame. We may have to replace the fork springs because they are really rusted. I then took a bucket of soapy water and scrubbed all of the dirt, dust and cobwebs...

Painting the frame was one of the easier jobs I've had to do. The frame was littered with small specks of rust that bad poked through from under the paint. It was required that I paint over the rust t...

I sandblasted the frame and ther parts a few weeks ago, and can finally start putting some of them together.  Once set up, sandblasting is a quick way to get down to bare metal, especially in har...

Stripped the old paint off the Daytona frame over the last couple of nights....

Here we have some advance photo's from the shop that's doing my frame mods as described in some detail above.... The new bash plate and USD forks in place  ...