The side covers were decided to be painted in graphite, and the fence paint did an excellent job – I really liked its color and texture. This paint took quite a long time to dry, after which, using th...

I started by completely dismantling the motorcycle into spare parts, taking into account the convenience of their subsequent maintenance and painting. This was not difficult and was done almost with m...

And today we're going to talk about modifying the battery compartment (or rather, completely abandoning its configuration), as well as making side covers and related modifications. Make yourselves com...

And today we're going to talk about modifying the battery compartment (or rather, completely abandoning its configuration), as well as making side covers and related modifications. Make yourselves com...

Once again thinking over the project, I realized that there is no way to bypass this step, because the native YBR exhaust is too bulky and low. And what is a scrubber without an adequate exhaust? I ha...

It's time to rework the rear of Sandy! Namely: redo the tail, make a new wing, integrate LED lights, and paint some elements. Make yourself comfortable, make some tea/coffee and let's go! As you reme...

Now it will be very convenient to glue the tank "inside" and disconnect it from the matrix. Putting the top 3 components together, I got a 2-part matrix, with which we work further in this sequence:...

It is a pleasure to welcome you again, dear reader! This is already our 6th meeting within the Sandy project. Today I will try to fully describe the process of making a fiberglass fuel tank for a scr...

We continue working on the Sandy project. For those who don't know yet - it is dedicated to building a unique scrumbler based on Yamaha YBR 125 motorcycle. Many people will say that it is strange, com...

It's time to work more closely on the front part of our Scrambler. There is plenty of space for creativity here, so I decided to do everything at once and little by little - what I had enough free ti...

And we keep going on and on... As you remember, it was decided to introduce a more powerful fork - from Suzuki GN 125, and also at the same time to install roller bearings in the steering column. But...

Hello everyone! You and I continue to work on the Sandy project - a small scrambler based on the Yamaha YBR125 motorcycle....

The first thing I wanted to do after buying the donor was to remove the EGR system and clean and tune the carburetor so I wouldn't have to revisit these issues later. EGR is a gas recirculation syste...