We put the chain and rear sprocket on no issues but the front sprocket castle nut wouldn’t budge. We tried using a 27mm 12 point sockets and it spun after given a decent amount of torque even though t...

Some more time spent on the wee Versys exploring coastlines and finding some beautiful bays that I had all to myself! Talk about feeling lucky! ❤️ Please consider subscribing to our YouTube channel if...

The factory manual says that the cam bushings rarely need replacing unless there is very high mileage.  On mine, with the cams installed dry, there was a nice slip fit on the right (big) end, but...

How do people ride motorways hours long haha? I did really enjoy the ride but wow didn't think 2 hours was that long and feel locked up and my back kills. Props to you guys doing long ass journeys up...

I only have a frame and some forks from 1978 to start me off so it's not really a rebuild or a restoration. I have no history with the bike, just a burning desire to get this pile of nuts and bolts ba...

Left is the battery OME, right was a spare one, it fits in the terminal just want to make sure it's not going to cause any problems...

Yesterday my dad drove me to his friend nate's shop. Nate is the guy we will have paint my fenders and gas tank. We left the tank and fenders with him to sand blast and my dad will pick them up from h...

Concerned it would be too easy to damage the frame. I cut into the lower inner race with a Dremel, cracked it with a small cold chisel and used it to drive the new one on. There was no problem using...

The first thing changed consumables and installed \ filled the following: 1.Oil filter Hiflofiltro HF191; 2.Battery VARTA Powersports AGM; 3.Motorbike 4T 10W40 Street Synthetic Oil....

Guess who dropped their special ultra light weight pressed metal brake leaver pivot nut down inside the fairing today I shall see what Mr Bembo wants for a replacement, and the nut may still be ther...

I have been umming and erring on whether I should do this or not. The only KTM dealer who I trust to do this just quoted me between £800-£1000 (about 950-1150 euros) so I have decided to take the matt...

It's nice to ride from the ocean to the snow...

It took me a long time to buy this bike, and I never thought I would buy a Golda. At different ages there were different reasons why not - starting from the old age of the oppositions and ending it on...

Hello everyone, quick question: Can these Brake pads still be used? Bike is a Honda CBR 600RR and these are from the back brake calliper. just did new ones in the front (all 4 of them). Do these also...

It took me on a tour of Europe that summer and fall from England to Istanbul, and back to Northern Germany, where I put it on a ship back to the states. A few weeks later, I picked it up in New Jerse...

My view at the MotoGP. This clip is from the "Sprint"....

What a great trip I had. Another adventure doing the MCGTTX hitting the (scavenger hunt) destinations and wrapping up the last three days at the MotoGP near Austin. First day out I was caught in a 30...

The folks at Rebel Gears delivered big time on service, knowledge, and product! I received my 56 tooth overlay sprocket today....

You need 12 off 17mm x 6mm Dzus fasteners and 12 slip on clips. D8 are the better machined fasteners. Available in crosshead , allen hex or D tab for hand removal. 3 along the top of the mi...

So I noticed this small nail in my rear tyre after went over a pothole and wanted to check my rims. The nail is about the same size as those Ikea nails you use to nail in your backboard. I posted a ke...