Ducabike sprocket carrier ??

The folks at Rebel Gears delivered big time on service, knowledge, and product! I received my 56 tooth overlay sprocket today....

Hello everyone! You and I continue to work on the Sandy project - a small scrambler based on the Yamaha YBR125 motorcycle....

Always a good feeling! Wish they stayed this pretty....

When I got to taking the rear wheel off, trying to loosen the nut did not loosen the nut. Checking the other side of the axle confirmed that it's just spinning the axle as a whole. It even started rot...

I'm changing out my chain and sprockets to a 520 conversion but I'm not sure which way the front sprocket faces. How can I measure which way it faces with one side having a shoulder and not the other?...

The GB came with the original chain and sprockets when I bought it. The sprockets were in ok shape but the chain was 24 years old and had close to 10000 miles on it so I decided to change it out. It w...

Upgraded...

#custom #build #rack...

Using the Motion Pro PBR Tool how does my Side Plate and Rivot look? I double checked with my Caliper Tool and the flare specs are supposed to be 5.6 - 5.8 and both my flares measure 5.78 Appreciate...

Anyone have tips for removing the front sprocket? I don’t have an air impact and I had the bike almost fall on me trying to crank on it with a breaker bar and someone standing on the rear brake. Alre...

Slightly terrified by what the old one looks like compared to the new... there's barely anything left of the damn thing! No surprise wasn't feeling quite the same power was used to. And yes, changed t...

The sprocket is held on with 8 bolts and was very easy to remove I have ordered new bolts and spring washers from Greystone Enterprises for when the sprocket is ready to be replaced. This Sprocket is...