Took off work at little early and visited these historic Kansas arch bridges...

It took me about 45 minutes to remove all the engine mounts and then to pull the engine out of the frame, but it takes you less than 2 minutes to see how I did it. Bike is a 1974 Honda CL200 (same eng...

I am reposting this gem of information for HondaTwins.net. Original post has been removed. It was an invaluable piece of information for me as a beginner, so it is my hope that other beginners will fi...

This is how I painted my old, used motorcycle wheel spokes. The same process should work for bicycle spokes as well. The bike is a 1974 Honda CL200. The spokes are cadmium plated steel (I think)....

The old rims on my 1974 Honda CL200 had seen better days. They were dented, out of true, scratched, a little rusty, and no longer safe. I tried pounding out the dents with a mallet and then with a blo...

...I began hearing some SCARY sounds from the engine. At times it was a ticking from the head, other times a clanking from the crank area. So the engine must come out and be inspected....

What started out as a mild, stock-ish restoration of a hard-to-find 1974 Honda CL200, the project began to steer in the direction of darkness when I decided to add some bratstyle/tracker styling cues....