First step was to build the dust excluder assenblies. This is really just installing seals and O rings. Apparently some time during '71, there were two seal designs. One was a conventional pressed-...

Michael Dunlop has just made motorsport history by becoming the most successful Isle of Man TT rider ever! In an awe-inspiring display, Michael clinched his 27th TT victory in Wednesday’s Supertwins...

I've been working slowly on the forks for the past few weeks. A lot of distractions lately, but things are still moving. From an appearance point of view, I knew I'd be repainting parts, but the cur...

The rear wheel rim is a WM2 and it was not holding air so I knew I would have to replace the inner tube, also the rim lock bolt looked to be in terrible condition....

The joy and learning experience of changing a regulator/rectifier on my Royal enfield interceptor 650. #motorcyclemaintenance #interceptor650 #royalenfield...

I've decided to publish my blog in short parts for your convenience. I think it would be boring to read a restoration blog the size of "War and Peace" :) Measured the oil clearances of the main and c...

Hey I've recently had problems with idle and an oil leak, fount that the front right coil has oil in the tube, anyone knows why and what seals should change? Could this be the cause of the bike not be...

The XSR900 GP is getting a lot of attention at the Oakley Motorcycle Club meet near Bedford last evening!  #Yamaha #XSR900GP...

From clay to conqueror - experience the evolution of THE BEAST with KISKA's vision for the 2024 KTM 1390 SUPER DUKE R....

Well that was a 1st today! Riding the tidal road at Aveton gifford on my Yamaha diversion xj900s. I did check the tide would be out before I went. @divvymanstravels #xj900sdiversion #diversionxj900s #...

Part 4 of my attempts to revive the Honda Continuing with the exhaust canister hassle...

After refurbishing the front brake plate and replacing the springs and shoes I was confident that the rears would not pose a problem....

I just changed the clutch it was my first time 4th gear is still slipping it stay but once you add throttle, it drops back down to three before the clutch change it didn't even recognize 4 I would hav...

 Trying to get a bit of lift with this and a set of links...

Last ride of 2016 ?...