Building of the bobber. Suzuki Intruder 750. Project Hooligan. Part 3. The result

The GT750 and I go back a long way. As a matter of fact I have some permanent scars and broken bones from crashing one in my late teens. I have also owned 4 of these over the years. The 1974 to 1976 m...

Project Hooligan...

The discs are sand-blasted, painted into black matte, the brake disc is drawn and made ventilated and scraped with a metal brush and a circular saw....

It's time y'all......

With both sides goobered on both edges this is how they are looking all mounted up!...

Had to move this stuff around....

So remember when I said I didn't have a plan? Well that was really dumb.......

Wanted to do something that didn't involve the rear of the bike for a quick break....

Figured I'd do this in a separate post. I think a lot of people run into this problem but I don't see too much talk about it here....

This was the card board template from the last post, it was traced from the cut down plastic panel I had a bunch of posts ago....

Needed to make up a new kickstand. As I said before I got a shortened one with the 17" wheels. But that one was too short....

Stock rear shock....

This is the very beginning of my motorcycle building project! From when I first went to check out and purchase the 1973 CB350G from the PO (purchase owner) in September 2014. I snuggled it into the ga...

Finally finished the teardown by this point. I took a lot of pictures for reference so I can remember how to put things back the way they came. I also needed a lot of photos of the rear end so I can g...

In this episode I took the angle grinder to the frame to cut off some of the tabs and such that I knew I wouldn't need anymore. I will be modding the frame to fit a different seat so it needs to be cl...

Here I dismantled the frong hub from the speedo drive then get the parts ready to be degreased. After degreasing comes sanding, then the buffing process begins! After 3 stages of buffing a brilliant s...

I took the frame up to Rob Cloutier of Bullit Custom Cycles to get the frame professionally modded. The goal was to fab a rear seat hoop and an electronics tray to fit all my goodies under the seat. W...

And we keep going on and on... As you remember, it was decided to introduce a more powerful fork - from Suzuki GN 125, and also at the same time to install roller bearings in the steering column. But...