Engine and gearbox rebuild

Christmas 2016, I gave myself a project to rebuild the gearbox of my broken engine and put it back into this bike, original engine back in so to speak....

[b]Engine mods:[/b] The stock Phillips head engine screws were replaced with a stainless steel Allen head bolt kit. All 8 valve tappet cover seals were replaced New clutch housing gasket was installe...

Unfortunately the previous owner gave this bike a hard life and the engine needs a full rebuild as when I opened it up, there was a lot of bolts rounded, clutch nut damaged, bolt missing off of oil pu...

It took me about 45 minutes to remove all the engine mounts and then to pull the engine out of the frame, but it takes you less than 2 minutes to see how I did it. Bike is a 1974 Honda CL200 (same eng...

The mineral oil keeps the clutch plates lubricated best in my 1600 Kawasaki. Bel-Ray Hypoid gear oil is for the shaft drive this particular bike has. I currently live and ride daily in Las Vegas where...

Serra da Freita: Regoufe mines, Meitriz and back home - Alvarenga (Portugal)...

I did just manage to change the oil ACCORDING to manual. Started up checked oil level. Added more. Started and checked. All in normal levels. Normal kawi tick? Note that this ticking and smoke on star...

And why mom needs stronger clutch springs ...

I had a bit of spare time this morning to attack the dirty cooling fins that surrounded the smog ports with their makeshift "loose change" block-offs.With some Norwex Cleaning Paste that I borrowed fr...

We continue working on the Sandy project. For those who don't know yet - it is dedicated to building a unique scrumbler based on Yamaha YBR 125 motorcycle. Many people will say that it is strange, com...

Very unusual but very beautiful color. I know that many Ducati fans may not appreciate this color, so don’t judge me in the comments for my opinion :D...

It feels like rust but its white, does anyone know how to remove them? Thanks in advance!...

Very interesting and worth a look...