Good way to stay happy and fit , she has no issues to put her leg up . She not even worried about wearing appropriate motorcycle gear . That a cool granny isn’t it ? ?...

Even on Dartmoor with beautiful views. #ridesafebacksafe #motorcycling #beasaferider #mentalhealthmotorbike #ridetosurvive #royalenfield #interceptor650 #divvymanstravels #intymanstravels #Trafficcont...

The results of the first outing showed the following: The clutch behaves inadequately. As I suspected, the release bearing with NC-30 doesn't fit the 21-24 engine, it's too long. I had to temporarily...

Porto - Sto Tirso - Guimarães - Fafe - Boticas - Chaves - Bragança. We left home at 9h and arrived at 16h. 280kms....

I thought I'd install them and forget about it, but nope, turns out the exhaust flanges on the 21 motor are tilted differently than on the NC-30. Had to bend them again, try fitting them like 20 times...

Time to dip the twin Amal 626’s and get out who knows how many years of gunk, varnish , and other deposits residing in the carb bodies. I like this Gunk brand cleaner……….the gallon comes with the part...

A moorland town on Dartmoor. A pretty town but difficult to relax as vehicles constantly driving around trying to park. Worried about my interceptor!...

Ok, this is a plug for a really good company to deal with, Jet Hot, the go-to folks for professional ceramic coating for decades. I have a local supplier that has done a lot of coating for me, but onl...

The Dutchman walked out of his T18 highside completely unscathed ?...

Hit 800+ miles on one day in 2021 while going from Oklahoma to West Virginia...

Stage 0 - the preparation...

Got the clutch in and finally rode the bike. Quickly realized this bike cannot run on 32:1(all I had on hand tj start the bike at the time) now I am running 60:1 recommended by Andre horvath’s ktm. Th...

The lower bush was very worn and could be removed by hand. The lower yoke on the Tiger Cub Competition models were reinforced, the gap between the two parts of the yoke has what looks like a large was...

I bought a 41mm Mikuni flat slide carb kit which has a plunger choke right on the carb. That meant the cable choke and its handlebar mounted lever had to go. I picked up a salvage CBR1100XX switch blo...