On frame!^^

Kawasaki Ninja 1000 sx...

A few photos of this handsome bike, I will try to make a more detailed post about this rare motorcycle when I have a little time, but now enjoy it....

Take an RS250 frame and sling in an RG500 2-stoke motor. It cost over £75000 and took two years to build...and we were allowed to ride it! With Classic Bike ......

I it's likely that there are a lot of automobile or motorcycle enthusiasts — some may be reading this right now, in fact — who are always dreaming of what they'd build if only they had the time, skil...

3 Bolt Frame Sliders!! (and Case Covers)...

The covers are aluminum and not plastic Since I have an SP, I used a dremel to make an opening to let the shock absorber cylinders pass through and to access the adjustments....

I basically just stripped the rest of the parts off of the frame. This leave me to be able to throughly clean the frame and possibly touch up paint if necessary....

I took the remaining parts off of the frame. We may have to replace the fork springs because they are really rusted. I then took a bucket of soapy water and scrubbed all of the dirt, dust and cobwebs...

Painting the frame was one of the easier jobs I've had to do. The frame was littered with small specks of rust that bad poked through from under the paint. It was required that I paint over the rust t...

I sandblasted the frame and ther parts a few weeks ago, and can finally start putting some of them together.  Once set up, sandblasting is a quick way to get down to bare metal, especially in har...

Stripped the old paint off the Daytona frame over the last couple of nights....

Here we have some advance photo's from the shop that's doing my frame mods as described in some detail above.... The new bash plate and USD forks in place  ...

Deus Ex Machina’s Michael “Woolie” Woolaway has created another race-inspired road bike in collaboration with legendary flat track chassis designer, Jeff Cole. Nicknamed The Framer, this build is i...