Hello, in order to block the gaping holes in the frame, I mounted these side covers

EzBull...

Teardown took several sessions in the garage! There are a lot of little pieces and things that need to come apart, but again it was cool to see how everything worked....

Met this unique bike with custom seat on the river :)...

The piston I ordered is technically a piston for a BSA, however, it will work for my bike perfectly. I needed a +.020 piston (20 over the original production size piston) because as the piston goes up...

The piston I ordered is technically a piston for a BSA, however, it will work for my bike perfectly. I needed a +.020 piston (20 over the original production size piston) because as the piston goes up...

For use in emergency situations when your side stand switch will fail or damage. It will allow you to continue your journey....

These are WP forks from a KTM Duke 2 640 so the size and geometry are a good match for the street scrambler proportions.The spec sheet says these are 43mm WP upside-down telescopic forks, reload, comp...

OK - the new kick-start has arrived and Hallelujah it will clear the pegs beautifully.......but (why is there always a clucking BUT!) the kick-start boss is going to foul my lovely KTM brake pedal. T...

Today I refitted my sludge tube and when it cam to refitting the screwed plug my replacement plug went in very easily - too easily in fact and has ended up deep in the thread....