Motoholic- BikeLife gear

Promised that I would follow that up with my load out of gear for traveling....

So let me tell you guys a little bit about my bikelife experience. İ have been riding motorcycles for 4 years now, as a young boy İ always dreamed of riding motorcycles. My first bike was a yamaha xt6...

So after my ride today, i decided i need new gloves and kevlar jeans. What gear do you ride in and what do you recommend ? Added a picture of my current gloves and im want something similar, unless...

AGV X3000 custom decals Lewis Leather x Urban Rider 442 Racing Jacket Resurgence Café Racer Jean Furygan Tom gloves...

Whats up who is in Tampa Fl , where the ride outs at ? I just moved out from miami Ig @352_corey...

My wife got tired of me throwing all my gear on the dining room table. $70 at Walmart. Not bad....

Just got put the carbs back in now as I need the engine running to do it!!...

Christmas 2016, I gave myself a project to rebuild the gearbox of my broken engine and put it back into this bike, original engine back in so to speak....

I just changed the clutch it was my first time 4th gear is still slipping it stay but once you add throttle, it drops back down to three before the clutch change it didn't even recognize 4 I would hav...

The good news is that as the crank shaft nut and the cam gears were tightened the crank has loosened up very slightly easing my mind on that score as well. New Morgo oil pump and oil pressure valve f...

Whilst spinning the cam plate through the gears I noticed one or two issues. 1. There is a track worn into the cam plate by the cam plate follower and 2. At some points - namely 2nd and 3rd gear the...