Gear up

Promised that I would follow that up with my load out of gear for traveling....

So after my ride today, i decided i need new gloves and kevlar jeans. What gear do you ride in and what do you recommend ? Added a picture of my current gloves and im want something similar, unless...

My wife got tired of me throwing all my gear on the dining room table. $70 at Walmart. Not bad....

Admittedly, fuel economy isn't my top concern when I'm riding my Ducati Panigale, but I noticed a big difference in how many miles I'd get out of a tank depending on my average RPM. Obviously, driving...

Just got put the carbs back in now as I need the engine running to do it!!...

Christmas 2016, I gave myself a project to rebuild the gearbox of my broken engine and put it back into this bike, original engine back in so to speak....

We continue working on the Sandy project. For those who don't know yet - it is dedicated to building a unique scrumbler based on Yamaha YBR 125 motorcycle. Many people will say that it is strange, com...

While cylinders are at the machine shop, I set to work on the gearbox. I normally replace all bearings and bushings in a transmission while it's open, whether they appear to need it or not. Shown he...

So I replaced my shift shaft seal and put everything back the right way, aligned the shifter with the marking on the shift rod. However I may have pushed the shift rod into the engine (possibly) Also...

I just changed the clutch it was my first time 4th gear is still slipping it stay but once you add throttle, it drops back down to three before the clutch change it didn't even recognize 4 I would hav...

The good news is that as the crank shaft nut and the cam gears were tightened the crank has loosened up very slightly easing my mind on that score as well. New Morgo oil pump and oil pressure valve f...

Whilst spinning the cam plate through the gears I noticed one or two issues. 1. There is a track worn into the cam plate by the cam plate follower and 2. At some points - namely 2nd and 3rd gear the...