“Bikes don't leak oil, they mark their territory.”  #Gitana / #Flamenca

You can replace the pump for $30, if your real, real careful with disassembly. Just hope that 1. it works & 2 it fixes the cutting out problemo. Otherwise its orf to the dealer for him to rape &am...

Not only does this common wear service item cause vacuum leaks, it allows fuel to leak as well. This one was found to not shut off fuel when no vacuum was applied (engine off) The diaphragm has...

I flushed my coolant last night and there was oil in it, also it was very milky. So then I decided to just change my oil to make sure there wasn't any coolant in it and there indeed was not coolant in...

My zx6r has been leaking from the left side and has had this build up for awhile, i was looking to see if anyone can help diagnose the issue?...

Hey I've recently had problems with idle and an oil leak, fount that the front right coil has oil in the tube, anyone knows why and what seals should change? Could this be the cause of the bike not be...

Cleaned up and repaired the oil tank and the tool cover, and got them mounted. The tank looked to be in decent shape. It had cracked and been repaired once many years ago. You can see the brazed re...

 In parallel with the oil tank I was also working on the tool cover of similar shape that goes on the other side of the bike. There is no earthly way to do a good job stripping, cleaning, or pai...

The exposed sides of the tank and cover were painted with about six coats each of black and clear lacquer, hand rubbed after each three coats. This series shows the progression of the final finishing...

The oil pressure sender (just a switch in this case), and the oil pressure relief are connected directly to the high pressure gallery from the oil pump that feeds the crankshaft. The relief valve is...

Triumphs of this era didn't have true oil filters.  What Triumph called filters in the sump and in the oil tank are really just coarse screens.  The only real provision for removing par...

A couple of days of off-and on work later, I had this. The filters (I can use either of the smaller diameter filters) have a 3/4-16 thread, so that's what the threaded nipple is. The nipple goes int...

I've got large hands so I always add these to my bikes. They lessen vibrations as well. The heated grips still work fine. The heat just takes a bit longer to reach your hands obviously....

Do you think they'll really be like that?...