Suspension, brakes, and fork seals.

I will attempt to replace the Fork Seals on my 97 Honda Shadow Spirit....

First time to do fork seals. Only took 3 hours. It was not as hard as I thought. Ready to ride....

Revisiting and enjoying one of my favourite rides. The A3072 from Bickleigh to Crediton. #divvymanstravels...

So.. No I haven't come off but this is about my brakes.....

So, in lockdown I decided I know, I'll sort and clean the brakes.....

I’ll be riding other bikes for a bit. I’m due for 20k service and my fork seals are gone. I’m told a rebuild is normal at 15k so I guess I did good going this long. Gonna be $1200 all said and done so...

-Front wheel, brake caliper and fork guards off -Loosen top triple clamp bolts and break the caps loose -Remove forks and unscrew the caps the rest of the way -Pull down the fork spring and insert...

Although this isn't strictly a riding technique there's a lot of false information about the 'correct' set up for a bike's suspension. The one main thing that most of these articles miss is the most c...

Swing arm has been cerakoted new bearings etc.... and I had the cam cover polished thanks to the "The zed shed" I couldn't polish it myself but managed to polish everything else that needs polishing....

And we keep going on and on... As you remember, it was decided to introduce a more powerful fork - from Suzuki GN 125, and also at the same time to install roller bearings in the steering column. But...

We continue working on the Sandy project. For those who don't know yet - it is dedicated to building a unique scrumbler based on Yamaha YBR 125 motorcycle. Many people will say that it is strange, com...

My right side clicker is "crunchy" and not as smooth or precise stops as the other side. It's not the damping rod or anything else below, it's the upper clicker assembly as it does it while the top is...

And there we were waiting for the green light, in the rain, when we looked to the side and there were 2 good looking guys on a bike just like ours. I took a photo of them and they of us ?...

From home to home ?...

Replacing the fork seals on my bike and I can't get the shaft to come out. I've put the forks in a clamp and violently pulled to no avail. The other one came apart just fine. Any ideas? 08' CBR 600RR...