Cleaning and general maintenance.

Checked and did Valve Clearances, flushed and replaced coolant, brake fluid and full synthetic oil, replaced oil filter. Cleaned entire bike and engine, installed aftermarket fairing kit. Installed fo...

Call it labour of love. This is what happens when your adventures reach far beyond Starbucks.?...

From home to home ?...

I took the remaining parts off of the frame. We may have to replace the fork springs because they are really rusted. I then took a bucket of soapy water and scrubbed all of the dirt, dust and cobwebs...

The allen bit I was using broke off in the bolt on the primary cover. Any advice for getting this out?...

Couldn't resist a solo drive to Honfleur via Pont Audemer. Then a leisurely drive back along the back roads through the Vexin, as beautiful as ever....

Today I cleaned and lubed my Chain after 1300kms...should have done it early but yeah i am little lazy....used Motul cleaner and lube, the whole process took 20min, dirty hands and floor...but the end...

Revisiting and enjoying one of my favourite rides. The A3072 from Bickleigh to Crediton. #divvymanstravels...

(Pads have been pushed back to stop rust patches on the discs whilst stored over winter. Hence the block of wood behind the brake lever)....

Pesky balancer shaft seal replaced, breather hose swapped to an upgraded one with a valve in it and oil changed....