Home
Suzuki GS 500 - BB-002
Motoblog
Upgraded rear shock.
FAQ • Contacts • Privacy policy • Agreement • Rules of Conduct
Suzuki GS 500 - BB-002
Suzuki GS 500 - BB-002
17 Dec 2020
Report

Upgraded rear shock.

New video out this weekend showing how to upgrade your old gs500 rear shock, to a much better, sv650 rear shock.

Suzuki GS 500 Scramblers Custom Custom Suzuki Custom GS 500 Custom Scramblers
4 4.1K
Comments
  • Russell Taylor 17 Dec 2020
    Translate
    Bloody hell! Bike is obviously not maintained! Be ashamed, very ashamed!
    Reply
    • Bare Bones Motorcycles 17 Dec 2020 author
      Translate
      Russell Taylor, im not that ashamed really, as i got the bile for nothing after it have been left outside for 6 years. once ive got all the mods done to it, it will be fully stripped, treated, painted/powder coated, and looking like new when it goes back together ??
      Reply
      • Russell Taylor 17 Dec 2020
        Translate
        Bare Bones Motorcycles, Fair enough!
        Reply
  • Bare Bones Motorcycles 17 Dec 2020 author
    Translate
    bike*
    Reply
Please Log In or install the app. Comments can be posted only by registered users.
Related
Kawasaki Z440 KZ
Kawasaki Z440 KZ
Rear engine cradle.
Again I decided Gland my rear cradle connector. I twist (sand and torch) a 20mm diameter tube and verify that the resulting angle is right....
Rear engine cradle.
0
Kawasaki Z440 KZ
Kawasaki Z440 KZ
Rear wheel
As I said, intro, I did not keep the original spoke wheels but put the Z400 model spoked wheels. The rear wheel that I bought secondhand really was tarnished and pitted by rust....
Rear wheel
0
Honda CB 1000
Honda CB 1000
Rear shot?
Follow: @lasermax01...
Rear shot?
0
Kawasaki Z H2 - ...
Kawasaki Z H2 - ...
H2SX Rear Shock Upgrade
Much, much better than the stock Pogo stick......
H2SX Rear Shock Upgrade
0
Kawasaki Ninja ZX-14R
Kawasaki Ninja ZX-14R
Rear wheel weights fell off
I just got my new tire mounted and balanced and ended up cleaning the chain too. I didn't notice till after cleaned the rim that two wheel weights had fallen off and I can't find any residue to figure...
Rear wheel weights fell off
2
TyrSam
TyrSam
Rear view
Rear view
0
Ace Munro
Ace Munro
Upgraded stock CCT
-BMW updated the Kbike with an OEM K1300s cam chain tensioner used to eliminate known loss of tension issues ?? Flat plate——> to cylinder style...
Upgraded stock CCT
0
Carlos Augusto
Carlos Augusto
Put a YSS Rear shock on it and Race Tech .70 with 20wt oil in the forks.
Feels really good initially. My wood clamp failed in the end but my long 14mm didn't! That's a head bolt from a Honda civic and a lug nut welded together....
Put a YSS Rear shock on it and Race Tech .70 with 20wt oil in the forks.
0
Dark Mind
Dark Mind
Rear Brakes - Tiger Cub T20CA
After refurbishing the front brake plate and replacing the springs and shoes I was confident that the rears would not pose a problem....
Rear Brakes - Tiger Cub T20CA
0
Dark Mind
Dark Mind
Rear Wheel, Tyre, Inner Tube & Rim Lock
The rear wheel rim is a WM2 and it was not holding air so I knew I would have to replace the inner tube, also the rim lock bolt looked to be in terrible condition....
Rear Wheel, Tyre, Inner Tube & Rim Lock
0
Dark Mind
Dark Mind
Rear Whell Bearings & Speedo Drive
Once the bearing security cover has been removed the spindle can be tapped out using a hammer and drift, this also removes the bearing on the other side. The speedo drive can them be gently tapped off...
Rear Whell Bearings & Speedo Drive
0
Dark Mind
Dark Mind
Rear Wheel, Tyre, Inner Tube & Rim Lock
The rear wheel rim is a WM2 and it was not holding air so I knew I would have to replace the inner tube, also the rim lock bolt looked to be in terrible condition....
Rear Wheel, Tyre, Inner Tube & Rim Lock
0
Dark Mind
Dark Mind
Rear Whell Bearings & Speedo Drive
Once the bearing security cover has been removed the spindle can be tapped out using a hammer and drift, this also removes the bearing on the other side. The speedo drive can them be gently tapped off...
Rear Whell Bearings & Speedo Drive
0
Dark Mind
Dark Mind
Rear Whell Bearings & Speedo Drive
Once the bearing is below part of the thread the locking cover was used to force the bearing down into place. On the other side the spacer and speedo drive where fitted back in place....
Rear Whell Bearings & Speedo Drive
0
Dark Mind
Dark Mind
SHOCK ABSORBERS
The competition models of the Tiger Cub had an extra bolt on the swinging arm to further secure the lower shock mount, these are connected to the normal lower mount via two brackets. They have been c...
SHOCK ABSORBERS
0
Dark Mind
Dark Mind
REAR WHEEL SPROCKET
The sprocket is held on with 8 bolts and was very easy to remove I have ordered new bolts and spring washers from Greystone Enterprises for when the sprocket is ready to be replaced. This Sprocket is...
REAR WHEEL SPROCKET
0
Jon Gavin
Jon Gavin
Going to rebuild and upgrade my rear shock
Going to rebuild and upgrade my rear shock
0
Steve S
Steve S
Rear tire change day (and more)
During a ‘street only’ shakedown run of the freshly installed (used) rear tire, two dualsport bikes pull out of a random driveway, so I followed them for a while to see if they might be heading to som...
Rear tire change day (and more)
2
Home
Menu
Posting
Notify
Sign In
Profile
Content creation
Search
Find a user
See More
FAQ • Contacts • Privacy policy • Agreement • Rules of Conduct