H2SX Rear Shock Upgrade

New video out this weekend showing how to upgrade your old gs500 rear shock, to a much better, sv650 rear shock....

What upgrades do you guys currently have for your R6?...

Upgrading seat and adding pillion pegs.. getting there....

Follow: @lasermax01...

I just got my new tire mounted and balanced and ended up cleaning the chain too. I didn't notice till after cleaned the rim that two wheel weights had fallen off and I can't find any residue to figure...

New Akrapovic...

-BMW updated the Kbike with an OEM K1300s cam chain tensioner used to eliminate known loss of tension issues ?? Flat plate——> to cylinder style...

Feels really good initially. My wood clamp failed in the end but my long 14mm didn't! That's a head bolt from a Honda civic and a lug nut welded together....

After refurbishing the front brake plate and replacing the springs and shoes I was confident that the rears would not pose a problem....

The rear wheel rim is a WM2 and it was not holding air so I knew I would have to replace the inner tube, also the rim lock bolt looked to be in terrible condition....

Once the bearing security cover has been removed the spindle can be tapped out using a hammer and drift, this also removes the bearing on the other side. The speedo drive can them be gently tapped off...

The rear wheel rim is a WM2 and it was not holding air so I knew I would have to replace the inner tube, also the rim lock bolt looked to be in terrible condition....

Once the bearing security cover has been removed the spindle can be tapped out using a hammer and drift, this also removes the bearing on the other side. The speedo drive can them be gently tapped off...

Once the bearing is below part of the thread the locking cover was used to force the bearing down into place. On the other side the spacer and speedo drive where fitted back in place....

The competition models of the Tiger Cub had an extra bolt on the swinging arm to further secure the lower shock mount, these are connected to the normal lower mount via two brackets. They have been c...

The sprocket is held on with 8 bolts and was very easy to remove I have ordered new bolts and spring washers from Greystone Enterprises for when the sprocket is ready to be replaced. This Sprocket is...

The motorcycle control specialist has recently added Featherlight-specification cables for key Buell models to its catalogue – a real bonus for owners, since finding OE replacements in the UK can b...