Well rear wheel, rear break, foot pegs gear lever back and fluid reservoir cap replaced

As I said, intro, I did not keep the original spoke wheels but put the Z400 model spoked wheels. The rear wheel that I bought secondhand really was tarnished and pitted by rust....

Swing arm has been cerakoted new bearings etc.... and I had the cam cover polished thanks to the "The zed shed" I couldn't polish it myself but managed to polish everything else that needs polishing....

We continue working on the Sandy project. For those who don't know yet - it is dedicated to building a unique scrumbler based on Yamaha YBR 125 motorcycle. Many people will say that it is strange, com...

Whilst I was idly passing time I've been seriously considering the kick-start problem. This is the problem caused by moving the foot pegs back into the swinging arc of the kick-start. Thus.... &n...

Disc and sprocket to be fitted but I couldn't wait to see the wheel on the swing arm....

The rear wheel rim is a WM2 and it was not holding air so I knew I would have to replace the inner tube, also the rim lock bolt looked to be in terrible condition....

The rear wheel rim is a WM2 and it was not holding air so I knew I would have to replace the inner tube, also the rim lock bolt looked to be in terrible condition....

The sprocket is held on with 8 bolts and was very easy to remove I have ordered new bolts and spring washers from Greystone Enterprises for when the sprocket is ready to be replaced. This Sprocket is...

Revisiting and enjoying one of my favourite rides. The A3072 from Bickleigh to Crediton. #divvymanstravels...

Part 2...

Part 3...