The folks at Rebel Gears delivered big time on service, knowledge, and product! I received my 56 tooth overlay sprocket today....

The piston I ordered is technically a piston for a BSA, however, it will work for my bike perfectly. I needed a +.020 piston (20 over the original production size piston) because as the piston goes up...

DIY Bates Desert Racer Seat...

I had to bang out the dent in the fender. It all went really really well without any complications. There is a long scratch where the dent used to be but that will get fixed when we get everything pai...

So, a Desert Sled it is………..or will become....

How cool is this! 1971 Triumph T100R Daytona…………that means twin carb, 500cc little hot rod. The bike showed up at a local shop called “The Daily Rider” in Burlington, VT. It’s a numbers matching examp...

Today I took off all of the wiring on the bike. I just had to disconnect all of the wires from their connections and I was done. I had to take the headlight off because all of the wires centralized in...

Today I took the fenders off of the bike. I set up the bike in the driveway and proceeded to unscrew tons of nuts and bolts to get parts off. The front fender came off with no problem. However, the ba...

The piston I ordered is technically a piston for a BSA, however, it will work for my bike perfectly. I needed a +.020 piston (20 over the original production size piston) because as the piston goes up...

I found a parts manual online that has diagrams of all of the different parts on the motorcycle and where they go.The manual shows a bike that is the same model as mine but it is 2 years older than my...

The Rocker Box had to come off first. We figured out that most of the bike uses Whitworth which is a British standard hardware. This is no longer used but since my bike was from 1970 they still used t...

Today my dad drove me to Colin's house to pick up a head steady. When we got home we took the motor out of the bike and brought it into the basement. We put it on the bench where I'm going to do the r...

The muffler is a racing type so it goes behind the frame and sticks out the back. It is a high muffler so it goes on top of the motor instead of underneath it. The muffler is a little rusty so we have...

Bought from the original owner, I've since added the period Lockhart oil cooler , heat shield , centre stand and passenger pegs. Goes as good as it looks....

This is the 1974 season colour green / white, from the 1974 brochure, chances are this is the only Tiger made in this colour scheme....

Today my dad and I tried to get the motorcycle to run. I mounted the carburetor then checked if it had spark, compression and fuel. It had all three of these things. However, the motorcycle, for a rea...

Today my dad and I went to look at a 1970 Triumph tr25w. The motorcycle didn't come with a couple of its parts including the carburetor and the gas tank. There were only 5,775 miles on it since it was...

The arrow can be removed, I'm trying, but it holds on very tightly. I checked all the wires and all the contacts, + and - everything comes to the board but it doesn’t go further along the board........