Brake line retainer stolen from my XX arm and trimmed, I just had to sneak a Honda part into the build :P...

4 cans of brake cleaner, 1 can WD40, half a dozen rags, 2 toothbrushes, a Scotch Brite pad, 6 hours labor and my last few squirts of S100 to detail this motor....

See if this helps......

Exhaust finished. Tidied up the mount tab, welded the can to the mid pipe, cleaned up the mid pipe and ran over the previous welds with the tig torch to dress them up....

And now, after we started Harley, the hungry but pleased went to look for the place to stay. we made a reservation only for the first night in AHO Guest House in order not to depend on the places of o...

Having left two seasons on my Dnepr Falcon and Brigadier, I suddenly felt the need for something more heavy, powerful, and with a fundamentally different approach to motor-building than the Soviet one...

Cleaned up and partially restored my gauges....numbers are still a bit sunbaked.......

The day finally came......

Realizing the tank I had was just too far gone for a ratrod look, I started the search for another 78 tank.......

This is where the story started.... A Craigslist ad for a 78 GS1000 that had not been started since 1990....$400...

I want to share my travel experience to Portugal and Spain on a motorcycle. It all started with the fact that my good friend pushed me to purchase a new motorcycle, and I am very grateful to him! gave...

Without changing the dream and going to our goals, we chose a date, made an approximate route. Riders: Urgis and his navigator Inna. We have traveled through seven countries: Poland, Czech Republic, G...

Project Hooligan...

If you ask yourself what is the most pleasant stage in the construction of a custom, then after the first start of the engine, I would undoubtedly name the final assembly stage....

"There is no formula of beauty (as well as a recipe for happiness), but if by some miracle they become known to you, then do not rush to touch them, because you deprive yourself of one of the brightes...

The clutch lever pivot hole size didn't match the lever perch, so I turned up a brass bushing to take up the slack...

Rear tank mount done...

Looks good, transfer to aluminum...

I've always wanted to build a slingshot... now I get to build 2!!...

Here's a bit of video for y'all... 5 minutes of Moonshiner 28 in North Carolina. Probably one of my most favorite roads EVER....