We’ve already reported on the TFC version of the Triumph Rocket 3. Now we have some more insight on the production version of the bike. This version won’t be quite as special as the TFC one, but it’ll still pack gobs of torque, plenty of power and most of what you’ll expect from a Rocket 3.

Morebikes shared a photo and information from the German publication Motorrad. The publication was able to snag some images (one of which is shown above) and provide readers with some important technical information about the model. According to Motorrad, the motorcycle will get a three-cylinder 2,458cc engine which will kick out in excess of 170 hp and over 162 ft-lb of torque. That’s a serious bump up from the previous bike.

The publication goes on to state that the 2020 Rocket 3 will be considerably lighter weight than the old bike. That means the increase in power will be even more noticeable. The 2020 model should come in at around 640 pounds, which is down from the old model by almost 100 pounds.

Other expected features:

• Brembo brakes
• electronic throttle control system
• traction control
• slope start help system
• four modes
• LCD device

Credit:webbikeworld

#Bike #Moto #Triumph #Rocket3