Clutch cable

I've done a wheelie and I killed the clutch =( I only take OEM . There's just a lot of disks... And being different, in different sizes and different thickness....

New articles up on The Master Link!...

Clutch has been slipping for a while. overheated the pressure plate springs over 20,000 miles ago fully loaded in a sand pit on a +100 degree day. glazed the friction and steels since then. So deglaze...

Okay here we go. Have you noticed your clutch lever creaking and making noise? Having done this as part of my regular maintenance for some time, figured I would share. What happens is the master cylin...

Has any of you v-Strom owners replaced this spring connecting to the clutch cable, before on a 2009 v-Strom and does anyone know the correct terminology of the spring, parts and name. Thanks for your...

Began to notice my Spiegler Black Synto brake and clutch levers were turning purple. They were just a few years old so, I contacted the company. They agreed to replace the defective product with a sil...

Ended up in the ditch at the side of the road, no damage apart from the crash bung, not even a mark on the bike...

How do I go about fixing this?...

I had a bit of free time today to mess around with the GB so I thought I'd tackle a relatively easy job. I bought the Barnett clutch springs when I got the piston kit and carb. They are a recommended...

Buying all new control cables (not speedo and tach) for the bike would apparently run around $200. Having promised Bonnie I would try to keep costs under control, I looked into building the cables my...

These are the little brass fittings that the soldered wire end slips into so that it can attach to the throttle twist grip. The one on the right was damaged, the left one was made from a piece of 1/4...

The front brake cable was definitely not original. It appeared to be some kind of universal replacement because there was no yoke fitting at the brake end--only a clamp arrangement that allowed adjus...

Does anyone live in the Phoenix metro area and have a recommendation for a shop that is fairly priced for a clutch issue?...

Great spot for photos of your bike....

So this is what that cable contraption in my primary tool pouch is for! Yes, I read the part of my owners manual that explains what it's really for, but I think it's safe to say I'll never actually u...

Couple weeks ago was planning on going on a ride, but was stopped short because my clutch wouldn't disengage. checked the adjuster but it was maxed out sol ordereda new cable. Holy shit am glad didn't...