Danach wurde viel sandgestrahlt, grundiert, wieder lackiert und natürlich auch das ein oder andere geflext oder geschweißt. Zur besseren Stabilität dürfen natürlich die Unterzug bzw Endurostreben nic...

Mit einer zündenden Idee und einem unschlagbaren Angebot fing es an. Mein Simson Projekt. Es stellte sich schnell heraus, dass doch 30% Kernschrott an der Karre waren und getauscht werden musste. Aber...

That time we rode back home along the A1A and turned a 6 hour ride home, to 10. Missing you sweetheart ❤...

Getting a bike and getting it where you want it to be a a huge love of mine...

Here's some 'before' shots of the rocker arms and the bottom engine case. I used Pine Sol to clean my parts. It worked great to degrease the parts but If I were to do this again I would take it to a m...

Before and after...

Engine teardown begins! I begin with the top end in this episode. This was probably the most fun I've had so far with the project! It was so cool to see the internal workings of my engine. I learned a...

My Fat Old Lady... Suzuki Bandit 600cc 1998 project....

This is what I came up for turn signal mount. The picture with the tires was me trying to figure if I wanted white walls or not. Its oil markers that we use at my auto shop I work at....

I have been working on my bike over the past two winters and I was done until the stator went out against year so I redid it this winter . I did so much to this bike. It's not perfect and I'm not a pr...

I've been mad about 2 stroke bikes since the late 70's and have had a number of Yamaha RD's since 1981 all of which have been tuned and modified Cafe Racer style. Most saw action on the drag strip. I'...

Almost ready to install all of the wirings...

Almost all the wiring to the m-unit is done...

1st time i rebuilded this bike, now im starting over again with a focus on 100% quality and clean looks...

This is how it looked like when i first bought this one...

I took the frame up to Rob Cloutier of Bullit Custom Cycles to get the frame professionally modded. The goal was to fab a rear seat hoop and an electronics tray to fit all my goodies under the seat. W...

Here I dismantled the frong hub from the speedo drive then get the parts ready to be degreased. After degreasing comes sanding, then the buffing process begins! After 3 stages of buffing a brilliant s...

Let the sanding begin!! Tough work.. a LOT of elbow grease. I also took apart the wheels/hubs so I could shine them up!...