Eye of the Tiger 🐅

It was awesome i think next year adventure motor is sorted!!!...

Lean and mean. styles makes smiles....

I have started my next, rather secret build project 'Hidden Tiger', named so as the misses doesn't know about it! As I had a spare engine which is the most expensive part of a bike and a lot of other...

Removing the front wheel was easy enough. However I later realised you need to loosen the brake plate securing nut before taking the wheel off otherwise the spindle just rotates. Removing the shoes wa...

After refurbishing the front brake plate and replacing the springs and shoes I was confident that the rears would not pose a problem....

My bike has an 18inch, WM2 rear rim, it has a 4.1 tyre that states it fits in place of a 3.5, this is good for the purpose I intend to use the bike for, which is riding on sand and dirt, but it does c...

  Managed to get the sludge trap open after liberal application of heat and using a hand held impact driver. Slight delay until I realised that I was actually driving it deeper at one point!...

As a motorcyclist, sometimes, you need to use your eyes, ears and your nose to avoid hazards. I did feel sorry for the poor animals in this truck. # divvymanstravels #interceptor650 ##anticipation #be...

A quick how to...

Some roads, despite the conditions, just beg to be ridden both ways when you're near them. #winterriding #motorcycling #ridesafebacksafe #beasaferider #advancedmotorcycling #divvymanstravels #intymans...

These Australian 9/81 build RS were likely born on the same day in Germany. I think 17 builds apart by vin. Seriously capable off road touring machines, for a road bike....

Bought from the original owner, I've since added the period Lockhart oil cooler , heat shield , centre stand and passenger pegs. Goes as good as it looks....

I only have a frame and some forks from 1978 to start me off so it's not really a rebuild or a restoration. I have no history with the bike, just a burning desire to get this pile of nuts and bolts ba...

OK - here's what I'm trying to emulate - quite rare and I don't even know if these were exported to the US, but in 1980 a small run of these bikes were produced. They have a pig ugly exhaust, 21 inch...