Echo (7,377ft/2,249m), Luther (7,740ft/ 2,359m), Carson (8,574ft / 2,613m), and Carson Spur (8,290ft / 2,527m). Sat next to a quy at breakfast in South Lake Tahoe that ran the Baja race in Mexico on a...

Craziest customization I've seen in a while ?...

Once the bearing is below part of the thread the locking cover was used to force the bearing down into place. On the other side the spacer and speedo drive where fitted back in place....

There's so much good stuff (and some really questionable stuff as well) hanging out in the back of these classic issues. Got a stack of them dated 1981-1985 at a yard sale....

If you're ever in Utah and want to go for a pretty ride, I highly recommend the Nebo loop. All these pictures were taken today along the route...

A narrow lane enjoyed by riders on the combined #plymouthadvancedmotorcyclists and #Cornwalladvancedmotorcyclists BBQ ride in deepest Cornwall. #interceptor650 #divvymanstravels #royalenfield @Plymou...

In 1934 but which never went into production...

Once the bearing security cover has been removed the spindle can be tapped out using a hammer and drift, this also removes the bearing on the other side. The speedo drive can them be gently tapped off...

  New cylinder and piston bolted in with a generous amount of oil used to assemble....

This morning, I noticed my Interceptor leaning at an odd angle. Investigation revealed a flat front tyre. I looked for a puncture, but all I could see was bubbles escaping around the valve stem and s...

The Rimini-based company, which had previously seen difficult times, ceased operations in September of this year. The factory in Rimini is closed. Rumor has it that the company logo was removed from i...

The day was cold, windy, also some rain and fog… perfect day to take my Pan America...

Frame and forks delivered at Stotford engineering for the necessary fettling to be carried out. They are going to use the standard T140 head bearings and adapt them to fit the KTM forks, then modify...

West Coast Road, Corney Fell, Torver, Langdale Pass, Wrynose Pass, Hardknott Pass, Birker Fell and back on the West Coast Road and home via Cold Fell....

Is this superficial?...

The exhaust thing can be done as these photo's demonstrate. I guess if you have the skill, time, materials, money and vision most things are possible. I just have to be realistic about how much of tha...