Yamaha YZF R1 Motorcycles with Real-World Photos & Specs

What connector connects to the kick stand sensor. I sent mine to a shop and it came back without the sensor. Just need a little guidance on with connector is used for it so I can just bypass it....

Any ideas what could cause the dash light to flash like normal but the indicators themselves (front and rear) not to work? Seems my indicators work on one side only which I think rules out an issue wi...

Does this spark plug look burnt out or is this a normal look for one that's done a few thousand miles?...

Ended up in the ditch at the side of the road, no damage apart from the crash bung, not even a mark on the bike...

I'm changing my battery in my 05 R1. I get to the part when you have to get to the screw and the YouTube video says up use 5/16 but driver, but my screw is round so it won't fit. Headed now for some...

R1 Parts Required (all other parts are re-usable)  - Forks - Upper Triple Clamp - Lower Triple Clamp...

This is a step by step video including torque specs....

On a yamaha r1 from 2007 when I pull the clutch lever there is a noise as seen in the video. I specify that that sound is only heard when I pull the lever, nothing is heard when idling, it shifts fin...

Track day coming soon and I have a 2007 Yamaha R6S. Anyone know what steering dampener will fit?...

I did need to regear the bike. I figured out that -1/+2 was too low gearing. I’m going back to +2 rear to try to limit the traction control interference on corner exit. Hopefully it helps…with a 52...

Got the rear shock in and swapped the front spacers twice trying to get the sag right. I’m going to ride it a bit and see if the front loosens up a little. Rider sag (not measuring with average for...

Got the front cartridges in…now If I can just get my shock delivered…supposed to be here by the end of the month....

Go slightly faster goodies going in n the R1…and Paradise by the Firelight…RIP Meatloaf!!!!...