I took the frame up to Rob Cloutier of Bullit Custom Cycles to get the frame professionally modded. The goal was to fab a rear seat hoop and an electronics tray to fit all my goodies under the seat. W...

Here I dismantled the frong hub from the speedo drive then get the parts ready to be degreased. After degreasing comes sanding, then the buffing process begins! After 3 stages of buffing a brilliant s...

In this episode I took the angle grinder to the frame to cut off some of the tabs and such that I knew I wouldn't need anymore. I will be modding the frame to fit a different seat so it needs to be cl...

Finally finished the teardown by this point. I took a lot of pictures for reference so I can remember how to put things back the way they came. I also needed a lot of photos of the rear end so I can g...

? didn't stay for a long time on Dnepr...

I bought it from a friend. It had been sitting for probably over twenty years. It looked like someone tried to make it a cruising bike with the fairing/windshield, highway bars, and luggage rack....

This bike never was mine. but it looks so unusual for me. so I decided to share some pictures with this Russian Frankenstein...

I had stripped a screw on one of the side covers and needed to drill into it. It's getting closer to being completely in pieces....

Teardown took several sessions in the garage! There are a lot of little pieces and things that need to come apart, but again it was cool to see how everything worked....

From the day I bought the bike till a month ago. She has a few new updates since but I'll put those pictures in another post....

This is the very beginning of my motorcycle building project! From when I first went to check out and purchase the 1973 CB350G from the PO (purchase owner) in September 2014. I snuggled it into the ga...

Yoshimura s2 Cams...

My bike is a 2007 GSXR 750. Bought this one at the beginning of the year and instantly fell in love with it. The handling is great, even though it is stretched, i was surprised at that. The power comp...

My Ninja 1000. Added vinyl custom made by AMR Racing, wrapped the wheels with vinyl, added CustomTaylor33 high intensity reflective. Zombie Response Team theme...

So I've just signed up to the sight and figure that I should update you all with what progress I've made......

Bars did end up coming yesterday. Got them and the riser "on" after work last night. Bike master "super bike" bend 7/8 and outlaw racing risers. In my opinion a really nice setup for only ~$55 for the...

Got my risers in. But bars didn't come in this week, damn it, but I can still get somethings ready for when they do. (Tomorrow hopefully)...

Waited to get the forks on 'till after work today. There is a 50 ton press in a shop next door where I work. Did not want to dremel the lower race off the stem yesterday when I could press the stem an...