Ginger was born in Japan in November 1972, weighing in at around 500lbs wet. She spent her first 47 years in the USA before finally arriving in Melbourne in April 2019. It was like a pregnancy, she wa...

To kick things off a little backround on this project. A good friend of mine bought the bike about 20 years ago in pristine condition. He met some gal and let her kids ride it. They totally hammered t...

Mit einer zündenden Idee und einem unschlagbaren Angebot fing es an. Mein Simson Projekt. Es stellte sich schnell heraus, dass doch 30% Kernschrott an der Karre waren und getauscht werden musste. Aber...

With winter approaching, the search was on for another resto to help ease through the darker days; what could be more appropriate for a couple of ‘grease monkeys’ than a CF70 Honda Chaly. Cries of ‘ar...

The bike was dropped on both sides..tensioner needed changing out..seat was crap..I repainted and polished everything..$80 for the tensioner and a used 2 Bros. pipe. it screams. was a breeze to repain...

Finally after quite a few months I got her all back together! Took so darn long with parts being on backordered. But it’s all good now?...

Today I am going to show you how I took care of the rust that was inside the gas tanks on my new winter project. The bike was originally registered in Florida and I suspect it was either in a flood o...

Haven’t ridden the old 2006 ktm 300 exc in 2 years and it needed the carbie and brakes done. Got it back now and all ready for the season! Looks pretty good for 14 years old...

Time to get back on the CG125 restoration!...

Oh my. I got myself into it this time. I found a TTR125 listed for $250. She was a little beat up, but I went to look....

I am not a mechanic. I'm an electronic engineer and Network Engineer. But I dabble in lots of stuff, and I've been looking for a hobby I actually enjoy for a long time. After a trip to DurhamTown in G...

Hi Everyone! Today i am going to share with you how to take rust out of an old Harley motorcycle flywheel with the electrolytic rust removal principle. All you need is a plastic bucket (non conductiv...

The bearing race was way too loose on the top of the 1980 frame for an unknown reason, and it need to be repair, so my friend ask me to take care of it for him, he heard that I have done something sim...

Let the sanding begin!! Tough work.. a LOT of elbow grease. I also took apart the wheels/hubs so I could shine them up!...

Hey all,...

New wheel bearings front and rear $60...

This is how I painted my old, used motorcycle wheel spokes. The same process should work for bicycle spokes as well. The bike is a 1974 Honda CL200. The spokes are cadmium plated steel (I think)....